If this email is not displayed properly, please use this link
http://www.imeco.at/oth/enews/enews.php?id=kw1508

August 2015

IMECO NEWS


Dear Customers and Business Partners!

The summer heat and the usual holiday season slow down many construction activities in the Middle East but we have to prepare ourselves for autumn when business will be back in full swing. For optimists as myself the prospects for the next twelve months are quite promising despite low oil prices and political problems all around.

This time I would like to draw your attention to the wide range of attachments which widens the use of hydraulic excavators significantly allowing pile driving, drilling, rock cutting and high capacity pumping at very reasonable cost.

Truly yours,

Karl H. Pacik

Direct links:
Imeco Website
Used Equipment
Contact us
Unsubscribe


VIBRATOR ATTACHMENTS

•••••••••••••••••••••••••••••••••••••

Hydraulic add-on vibrators or excavator attachments can be used to drive and extract sheet piles, H-beams and pipe piles with great performance and efficiency. Depending on excavator size as well as boom and stick configuration the usual pile length is up to 8 m but can be increased using ‘goose necks’ to extend reach and height.

We offer add-on vibrators from ABI series HVR with a centrifugal force from 300-500 kN and a static moment between 3 and 10 kgm for many small and medium sized piling works.

DRILL ATTACHMENTS

•••••••••••••••••••••••••••••••••••••

Hydraulic add-on drills are probably the most versatile attachments. They can be used to drill small boreholes for wellpoint filters, to pre-drill hard soil for sheet pile or H-beam installation (mostly of 350-400 diameter) but also for short CFA piles, if the drill comes with a concreting swivel and the required by-pass arrangement.

But (as shown on the photo to the right) even very special applications such as soil mixed piles are possible with a suitable excavator and the right auger drive. Your excavator will never stand idle if you have such multi-purpose hydraulic auger drive in your fleet!

CUTTER ATTACHMENTS

•••••••••••••••••••••••••••••••••••••

Hydraulic drum cutters convert any excavator into a very effective equipment to trim and cut concrete and soft to medium hard rock.
Our cutters are available in transvers and axial versions with cutting widths from 650-1250 mm and for base machines from 2-65 tons operating weight.

Hydraulic drum cutters are used to cut trenches for utility pipelines, to widen shafts and manhole areas, trim secant concrete piles, cut asphalt and much more.

PUMP ATTACHMENTS

•••••••••••••••••••••••••••••••••••••

The applications for hydraulic pumps with agitator are endless: Handling of waste water sludge and water treatment slumps, dredging deposits up to 120 m depth, clean out trenches and caissons, pumping bentonite slurry, dredging of small marinas, harbours and dock facilities, reclaiming beaches, clean out rivers, lakes and canals as well as for ash, lime, copper and coal collection.
The hydraulic add-on pumps are also available with sidemounted hydraulic excavators to cut hard material and soil in a capacity range from 100-1100 m3/h.


Please contact us with all your needs and we will do our very best to assist you.
If you are interested in second hand equipment we invite you to visit our website.

Impressum:
IMECO HandelsgesmbH
Traklgasse 25/1 | 1190 Vienna | Austria
Phone: +43.1.328 9980 | Fax: +43.1.328 9944
Email: imeco@imeco.at | Web: www.imeco.at

Direct links:
Imeco Website
Used Equipment
Contact us
Unsubscribe